Beer Font Tower - Six Tap Modular Beer Font with Tap

The Keg King Six Tap Modular Beer Font Tower set provides a fantastic looking, professional finish to any bar or beverage sales location
These fonts work great for mounting on our Super Deluxe series of professional grade under-bar fridges
Fonts like our Six Tap Modular font require two stand pipes and are also referred to as Soccer Goal Fonts, Goalpost Fonts or Bridging Fonts
Each Keg King Modular Font is constructed from 304 Stainless Steel and manufactured to be assembled with 2 inch tri-clover fittings
Keg King Modular Font Kits are designed to work with our 3/4 inch Kinglok fittings that provide users the ability to disconnect their taps quickly and easily for maintenance or cleaning

The Keg King Six Tap Modular Font Kit comes with everything you need to set up a six tap modular font and includes the following:
Flexible Tri-Clover design Professional visual impact
2x 2-inch Tri-Clover Stand Pipes
2x 2-inch 90 degree Elbow Bends
6x 2-inch Tri-Clover Extensions x 3/4 inch
6x Kinglock x 3/4 inch male
6x Kinglock Tap Adaptors
6x SL6 Washers
6x Elbow Barb 6mm
9x 2-inch Tri-Clover Double Beaded Silicone Seals
9x 2-inch Tri-Clover Clamps
6x Ultratap Faucets
2x Triple Line Sets
6x Premium Liquid Disconnect Black
6x Premium Gas Disconnect Grey
Instruction Diagram Available HERE

Specifications:
Material 304 Stainless Steel
Dimensions:
Height 390mm top of the font, 475mm top of tap handles
Width 925 to the outside edge of each stand pipe base
Works well with the KegMaster Super Deluxe Two Door XL or KegMaster Super Deluxe Three Door
If you have your fridge mounted under a bench, we recommend using our Under-Bench Telescopic Font Adaptor

PLEASE NOTE: The 3/4inch Male threading on the KingLok fitting contains a black silcone o-ring at the top of the threads This o-ring DOES NOT need to seal up against the top of the 3/4inch female modular font port The o-ring will normally sit slightly above because of the Kinglok fitting compressing against the SL6 washer This is normal If you find the o-ring visually displeasing you can remove it from the Kinglok fitting